Morgan renovation

Search This Blog

Taped and tyred

Get link
Facebook
X
Pinterest
Email
Other Apps

The PVC tape was straightforward to wrap, and two new tyres complete this part of the job.

Still plenty to do!

March 07, 2021

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

A starting point

After several (30!) years of thinking that one day I would own a Morgan, from December 3rd 2019, I now do. It's a 1995 Morgan 4/4, with the 1800 cc Ford Zetec engine. Reasonably low mileage, current MOT, and a fair bit of rust around the wings and running boards (as the Colwall Classic Cars chap said, its a bit "frilly around the edges". I drove home the 35 miles from Colwall without incident, and took Stephanie for her first trip. The car started to misfire, conked out on a roundabout, but struggled back to life after a couple of minutes. She's not quite so keen to try again! But I think it may have been dirt in the fuel, possibly. The only other thing to note is slight wheel wobble at about 68-70 mph.

Rebuilding the sill

First I used some aluminium mesh, as a base. My attempt to fix this down with a layer of fibreglass failed miserably, so I resorted to just using the resin to stick the mesh in place first, and then will add fibreglass tomorrow. Lots of filler. Then paint & lacquer. It ain't perfect, but for a lock-down repair, it'll do.

Welding practice

With my new Clarke MIG welding machine, I'm now learning to weld. This was once a rusty saw blade, and is now a small metal cuboid. Why? Because it was there!

Powered by Blogger

Taped and tyred

Comments

Post a Comment